Commercial SPF roofing
Roof assessment, preparation, foam application, coating, details, and maintenance planning.
Project capabilities
See the work behind the recommendation.
Explore Score’s exterior roofing and interior insulation work. See how the application changes between a flat-roof surface, the underside of a roof deck and the framing of a home.
The right starting point
Look closely at the work and the details.
Start with our Staten Island case study: four residential housing towers with more than 80,000 square feet of roofing in total. The separate installation gallery below shows additional examples across our roofing and insulation work; that gallery is not a before-and-after sequence from one property.
Featured Score project
Four housing towers. More than 80,000 square feet of roofing.
Staten Island, New York
Across four residential towers, Score retained the existing roofing membranes and installed a Carlisle spray polyurethane foam system with three coats of silicone coating and roofing granules.
The project included more than two inches of foam, with an estimated added insulation value of R-14 or greater. The completed system carries a 20-year manufacturer-backed Carlisle warranty, subject to the manufacturer’s terms.
See the project account and photographs, including foam application, coating work, and details around rooftop equipment. This is one project’s scope—not a specification or warranty promise for every roof.
View the Staten Island roofing case studySelected project work
Real installations across commercial roofing and building insulation.
Browse exterior roofing, protective roof coatings, and interior insulation installations. Follow the service links to learn about the work shown and discuss a similar project.
What matters
Experience across roofs, insulation, and protective coatings.
Building insulation
Residential, commercial, attic, and metal-building assemblies with project-specific preparation.
Protective roof coatings
Condition assessment, preparation, material selection, details, and maintenance planning for suitable roofs.
The process
From the starting condition to the completed work.
- 01
Review the starting condition
See the problem, building type, access considerations, and performance goals that shaped the project.
- 02
Understand the selected scope
Learn why the solution fit the conditions and what preparation or coordination the work required.
- 03
See the completed work
Review installation photos and available details about the finished project.
Common questions
Answers before the next step.
What can I learn from a project example?
Project examples can show the starting condition, application, preparation, installation process, and the result the owner was seeking.
Will every project name the customer?
No. Customer privacy can be protected while still sharing the property type, general location, scope, and technical details.
Can I ask about a project similar to mine?
Yes. Contact Score with your location, building type, photos, and goals so the team can discuss comparable work and the right next step.
Ready to discuss the project?